MP Board · Class 12 · Physics · Alternating CurrentDerive an expression for the total impedance ($Z$) and phase angle ($\phi$) of a series LCR circuit connected to an alternating voltage source $V = V0 \sin(\omega t)$ using the phasor diagram method. Also, derive the condition for electrical resonance and write the expression for the resonant frequency.
Series LCR Circuit Analysis
1. Circuit Description and Phasor Diagram Method\nConsider a resistor of resistance $R$, an inductor of inductance $L$, and a capacitor of capacitance $C$ connected in series across an alternating voltage source given by:
$$V = V_0 \sin(\omega t)$$\nLet $I$ be the instantaneous current flowing through the circuit at any instant $t$.
- The potential difference across the resistor is $V_R = I R$ (in phase with current $I$).
- The potential difference across the inductor is $V_L = I X_L$ (leading the current $I$ by a phase angle of $\pi/2$).
- The potential difference across the capacitor is $V_C = I X_C$ (lagging behind the current $I$ by a phase angle of $\pi/2$). \nHere, $X_L = \omega L$ is the inductive reactance and $X_C = \frac{1}{\omega C}$ is the capacitive reactance.
2. Derivation of Expression for Impedance ($Z$)\nSince $V_L$ and $V_C$ are in opposite phase ($180^\circ$ out of phase), their effective magnitude is $(V_L - V_C)$ assuming $V_L > V_C$.\nUsing the phasor diagram, the resultant supply voltage $V_0$ is given by the Pythagorean theorem:
$$V_0^2 = V_R^2 + (V_L - V_C)^2$$ \nSubstituting the expressions for $V_R$, $V_L$, and $V_C$: $$V_0^2 = (I_0 R)^2 + (I_0 X_L - I_0 X_C)^2$$ $$V_0^2 = I_0^2 \left[ R^2 + (X_L - X_C)^2 \right]$$ $$\frac{V_0}{I_0} = \sqrt{R^2 + (X_L - X_C)^2}$$ \nThe ratio $\frac{V_0}{I_0}$ is defined as the total effective opposition to the flow of AC, called the Impedance ($Z$) of the circuit: $$Z = \sqrt{R^2 + (X_L - X_C)^2}$$ $$Z = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}$$
3. Phase Angle ($\phi$)\nFrom the phasor right-angled triangle, the phase angle $\phi$ between voltage and current is given by:
$$\tan\phi = \frac{V_L - V_C}{V_R} = \frac{I_0 X_L - I_0 X_C}{I_0 R}$$ $$\tan\phi = \frac{X_L - X_C}{R} = \frac{\omega L - \frac{1}{\omega C}}{R}$$ $$\phi = \tan^{-1}\left( \frac{\omega L - \frac{1}{\omega C}}{R} \right)$$
4. Electrical Resonance and Resonant Frequency
- Definition: Electrical resonance occurs in a series LCR circuit when the circuit allows maximum current flow at a specific frequency of the applied AC voltage.
- Condition for Resonance: At resonance, the inductive reactance equals the capacitive reactance: $$X_L = X_C$$ $$\omega_r L = \frac{1}{\omega_r C}$$ $$\omega_r^2 = \frac{1}{LC} \implies \omega_r = \frac{1}{\sqrt{LC}}$$ \nSince angular frequency $\omega_r = 2\pi f_r$, the resonant frequency $f_r$ is: $$2\pi f_r = \frac{1}{\sqrt{LC}}$$ $$f_r = \frac{1}{2\pi \sqrt{LC}}$$ \nAt resonance, the impedance becomes minimum ($Z_{min} = R$) and pure resistive, resulting in a maximum amplitude of current $I_0 = \frac{V_0}{R}$.